74 telecommuting jobs in architect engineer cad
Subscribe to jobs in Architect Engineer Cad
Civil Engineer Cad Project Manager Southeast Pa details visit
09/02/2010
Seeking Civil Engineer that also has AutoCADD and Project Management skills to assist in Commercial Land Developement projects in PA and NJ. 5 years minimium applicable experience required. Working knowledge of PA and/or NJ stormwater managent regulati
ons and design is desired. Ideal candidate will be able to perform a wide range of tasks from drafting concept plans, assisting the Project Manager in permitting and design, and performing various land development design tasks. Work from home oppoprtunity is available to the right candidate. Full health/dental/401k/disability benefits offered.
We are a small, young, proressive firm with a mostly remote workforce. Our employees exhibit a strong work ethic and understand that the highest level of quality and customer service is a MUST. PE is desired, but not required.
Please email resume.
Water Wastewater Resident Inspector North Shore details visit
09/02/2010
Seeking Resident Engineer candidates for immediate 8 to 10 week assignement.
- 3 yrs of construction or construction inspection experience REQUIRED
- Treatment plant and/or pumping station construction inspection experience is REQUIRED.
- Gravity sewe
rs and force mains experience a plus.
- BS in civil engineering, environmental engineering or a related field is desired.
- Certifications a plus.
Sales Rep Needed For Internet Based Architecture Co Denver details visit
09/02/2010
New internet based architecture company with a global perspective on stock architecture
We are looking for outgoing, organized, honest and self motivated sales consultants. As the company is internet based, sales are predominantly done over the ph
one, so we are looking for people with just as much confidence and personality over the phone as they do in person.
QUALIFICATIONS
-Our client base is architects and architectural designers so any knowledge of this industry is a plus (which is why we are posting under architecture)
-Must have sales experience, and ability to close sales over the phone
-Must be able to work independently
-Must be results oriented, and have a strong work ethic
-Must have a computer with high speed internet connection
The position is purely commission based, and you are responsible for producing your own leads. Generating warm leads is very easy in this economic climate, and interest levels are high. For these reasons we need dedicated, honest, and personable sales consultants that can address and overcome objections, questions, and close sales.
• Set your own hours, part time or full time, as an independent consultant (Independent Contractor)
• Earn commissions (with no cap) as well as performance based bonuses, and residual profits
• No commuting, you can work from your own home or office
• Training provided
• As an architect or designer, receive free access to the site and earn money on your own plans
If you feel you meet these requirements please email your resume for review
Wanted Electrical Engineer Graduate Student Ok For Design Schematic La County details visit
09/01/2010
We are looking for an electrical engineer (graduate student or recent grad) that can produce a schematic diagram for a small, simple electronic device that we are developing. All parts are common and similar electronics are commonplace. We require an en
gineer with the ability to interpret our functional, "end user" requirements and develop the diagram, parts list, board geometry, physical parameters (such as the assembly thickness), and current capacity requirements that will be used by an integrated circuits manufacturer to fabricate the device.
Requirements:
Graduate student or recent graduate of a reputable engineering program
Satisfactory experience with engineering software used to create schematic diagrams
Experience with simple RFID technology
Able to interpret functional requirements and develop an electrical device that will perform
Able to produce, revise, and complete a usable design schematic within a 2-month time-frame
Willing to sign a non-disclosure agreement (NDA) and an independent contractor agreement
Fees:
25% at outset
remaining 75% after integrated circuits manufacturer certifies that schematic is satisfactory for fabrication
Project total: $1200-2500, DOE
Though we are not engineers, we are aware that this device is exceptionally rudimentary. As such, we do not foresee a drawn-out development process.
To apply:
After a brief cover letter highlighting your relevant experience (design software, RFID), please copy and paste your resume into the body of an email and send to the URL listed in this posting. We appreciate your interest.
Industrial Electronic Technicians Needed Cumming Ga details visit
09/01/2010
We are looking for a few good electronic technicians to help us grow our company in the industrial repair industry. The techs will be testing, troubleshooting at the comment level of industrial equipment such as replacing diodes, resistors, caps, fans, po
wer supplies, and repairing trace damage. Powering up/ testing the equipment after unit is repaired to make sure the inputs/ outputs have the right voltage/ amps. We are looking for experience people.
Please email resume to: sales@internationalelectronicsolutions.com
Job Description: Industrial Electronic Technician
Immediate Opening - Looking for Electronic Technician's. Part time to full time positions available. Pay is based on experience. Experience in industrial electronic repair preferred but not required.
Desired qualifications include:
· Ethical standards of conduct, integrity and honesty.
· Competence in troubleshooting complex digital or analog circuitry to the component level.
· Self-motivated, quality-focused, and teamwork-oriented.
Please feel free to contact me with any further questions, and have a nice day!
Thanks for your time and consideration!
Revit Operator Modeler details visit
08/31/2010
Need help with Revit 2010(structural) for the completion a project.(custom residence)
Experience in architectural drafting a must. May work at home.
Environmental Scientist Evergreen details visit
08/30/2010
Environmental Scientist Position Description
Specialized environmental consulting firm in Evergreen, Colorado has an immediate opening for a contract Staff or Project Level Environmental Professional to become an integral member of our team. The succe
ssful candidate should have experience environmental site assessments, groundwater monitoring and reporting, and field oversight for remediation projects. The position has significant growth potential as the selected candidate will work directly the company president and principle environmental remediation engineer with over 25 years of experience.
The work hours are flexible targeting a minimum of 20 hours per week up to 40 hours per week, with approximately 2-4 hours per day between 8-5 M-F. A significant amount of the work can be completed from a home office.
Education:
Although not required, the ideal candidate will have a Bachelors Degree in science, possibly specializing in chemistry, geology, engineering, or environmental science.
Required Skills:
Three or more years of experience, preferably with an environmental consulting firm performing the duties described above. The successful candidate will have work experience with completion of site assessment and remediation activities including organizing field sampling efforts, managing large amounts of laboratory data and analyzing information and preparing semi-annual reports. Candidate should have excellent oral and written communication skills, a positive attitude, and a strong work ethic. Candidates proficient with MS Office and a working understanding of ArcGIS, Google Earth, and/or AutoCAD are preferred.
Compensation – Commensurate with experience
Submit resumes via email. No phone calls.
Successful candidate must pass a criminal background and drug test.
Project Manager –dimp Implementations Fort Collins Co Or Remote details visit
08/30/2010
New Century Software is searching for a project manager with 5-10 years of operations and/or engineering experience in the gas distribution industry to lead customer implementations of our Distribution Integrity Management Program (DIMP) solution. The id
eal candidate will have worked within an ESRI environment but also have an understanding of other GIS platforms such as Smallworld and Intergraph.
Responsibilities:
- Manage the implementation of our DIMP software and services
- Assist clients in developing and organizing data needed to support DIMP
- Work with our product managers and professional services team to enhance our DIMP solution
- Develop content such as whitepapers, webinars, and tradeshow presentations
- Partner with the sales and marketing team to deliver sales presentations and generate proposals
This position is based in Fort Collins, CO. Other locations will be considered. To apply, please email your resume and a cover letter to careers@newcenturysoftware.com.
Architectural Bim Revit Specialist Chicago Area details visit
08/30/2010
5yr min. Revit experience
Must be architecturally degreed
Understanding of construction drawings
Have worked with Federal/local Government projects, bonus
Have worked with OSHA codes, bonus
Send resume and portfolio. Must meet requirements above.
Revit Modeling details visit
08/29/2010
Looking for an experienced Revit modeling expert for freelance project
Please email sample of work done
1